S0606D 360degree continuous rotation 6kg digital servo
Item No.:DM-S0606D
Art No.:5421066
Brief: POM gears,6kg digital servo,360degree continuous rotation,Digital IC,2 ball bearings,output shaft 25T
Application: robot and so on
【Features】
High presicion plastic gears;
Select torque motor,could compare with import one;
long life Potentiometer;
expert and experienced in circuit for 10 years;
TOP choice on case plastic,and best mold manufacture
Futaba,JR,SANWA,Hitec compatible.
【Specifications】
Item No. DM-S0606D
Operating Voltage: 4.8V~6V
Speed: 0.14 sec/60deg (4.8v) 0.12sec/60deg (6v)
Torque: 5.5kg.cm (4.8v) 6.5kg.cm (6v)
Size: 40mmX20mmX38.5mm
Weight: 40gram
Motor: 3 pole Core motor
Gear Train: plastic(POM gear)
Ball Bearing: 2BB
Dead band width: 4usc
Interface: (JR)
Wire length: 30cm
Type: Digital,2BB,
Rotation angle:360o continuous rotation ( PWM 1500US,servo stop,other PWM servo turn continiuously,when 1000 -1500us,the far to 1500us,servo turn faster,when 1500us -2000us,the far from 1500us,servo turn faster )
【Important Notes】
*Please specify the plug(JR or Futaba connector),or we offer JR plug for you,for it is compatible.Futaba plug.
*Please
do read the instruction before you install the servo.Rubber grommet
must be used to reduce vibration when you install the servo on GP
airplane,GP car or GP boat.
*Please choose suitable servo for you rc model.Torque overload will damage your servo.
*Keep the servo clean and away from dust,corrosive gas and humid air.
*Specification are subject to change without notice
【Packing include】
1pcsXDM-S0606D servo
Accessaries:servo horns,rubber grommets, eyelets and mounting screws
1 x double sided servo horn 1 x 4-arm servo horn 1 x 6-arm servo horn 1 x round servo disc
4 x rubber grommets with brass inserts 4 x mounting screws
1 x mounting bolt 3x 8mm for servo horn installation on the ball raced brass output shaft with 25T-spline drive
GW: 45 g
