Homepage BookMark 繁體中文 简体中文

CLS305MD FMC Metal Gear standard 30kg Coreless Digital Servo

DM-CLS305MDX07.jpgItem No.:DM-CLS305MD

Art No.:5433308

Brief: Full metal case,Metal gears,coreless motor,30kg digital servo,2 ball bearings,standard servo size, output shaft 25T 

Application:rc car,rc plane,rc helicopter,robot



High presicion metal gears made by CNC;

Select coreless motor,could compare with import one;

1million life Potentiometer;

expert and experienced in circuit for 10 years;

CNC full metal case

Standard DM-CLS305MDX05.jpgSize,Coreless,digital,metal gears,25T,2BB

Futaba,JR,SANWA,Hitec compatible.


Aluminium case for heatsink


Item No. DM-CLS305MD

Operating Voltage: 6V~7.4V

Speed: 0.15 sec/60deg (6.0v)    0.13sec/60deg (7.4v)

Torque: 27.8kg.cm (6.0v)          29.6kg.cm (7.4v)

Size: 40mmX20mmX41mm

Rotation angle:180degree(PWM500-2500us)

Weight: 76gram

Motor: Coreless

Gear Train: Metal gear

Ball Bearing: 2BB

Dead band width: 2usc

Interface: (JR)

Wire length: 30cm

Type: Digital,Aluminium heat sink case,Coreless


*Please specify the plug(JR or Futaba connector),or we offer JR plug for you,for it is compatible.Futaba plug.
*Please do read the instruction before you install the servo.Rubber grommet must be used to reduce vibration when you install the servo on GP airplane,GP car or GP boat.
*Please choose suitable servo for you rc model.Torque overload will damage your servo.
*Keep the servo clean and away from dust,corrosive gas and humid air.
*Specification are subject to change without notice 

【Packing include】

     1pcsXDM-CLS305MD  servo

     Accessaries:servo horns,rubber grommets, eyelets and mounting screws

         1 x double sided servo horn       1 x 4-arm servo horn    1 x 6-arm servo horn    1 x round servo disc 
         4 x rubber grommets with brass inserts           4 x mounting screws 
         1 x mounting bolt 3x 8mm for servo horn installation on the ball raced brass output shaft with 25T-spline drive
     GW: 87 g